Time spent on the river is knowledge. And the more time you spend on the river, the more your gear needs to perform at a high level. Our G3 Guide™ Wading Boot is designed with working guides in mind. This means the support, traction and durability that 200-plus days on the river demand. The boot features big-time ankle support and an enhanced feel underfoot to help you get to hard-to-reach places. Our Rivertread® build gives you more feeling under your boot, so the unseen becomes easier to navigate without compromising on the overall support or traction of the boot. With proven durability to handle the wear and tear of hiking and wading day in and day out, the G3 Guide™ Boot gives your confidence to move across rocky river bottoms anywhere in the world.
View the G3 Guide Boot
MEN'S WADING BOOT SIZE CHART
To allow proper room for the neoprene stockingfoot, find your regular shoe size in the right-hand columns and order the corresponding Simms Boot in the first column. This will typically be one size up from your normal shoe size for men and one size down for women (ie: a women's USA size 8 would take a men's boot size 7).
(Simms Boot size 5 will fit a Youth Size 4, etc.)
Vibram® invests heavily in research and development of products never overlooking even the most minute detail. Inspired by free climbing rubber, Vibram Idrogrip is ideal on wet surfaces and improves grip on slippery terrain. Vibram Megagrip offers the ideal combination of grip and durability for maximum surface adaptability.
GUIDE BOOT CARE:
For proper cleaning of your footwear to descrease the likelihood of spreading Aquatic Invasive Species, please reference our CleanStream™ page.
Guide boots are made water-repellent full grain Nubuck leather. They require little maintenance but should be cleaned and dried.
If using in saltwater always clean and rinse to prevent corrosion.
Use a brush to remove dust and dirt. Choose an old vegetable brush or toothbrush. For maximum thoroughness, remove laces prior to cleaning. Use specialized boot cleaner, saddle soap or maybe a mild dishwashing soap with luke-warm water.
Do not use bar soap or detergents.
Do not place wet boots close to a heat source (fireplace, campfire, wood stove, radiator, heater, sunny windowsill) as this can weaken adhesives and cause materials to become brittle or shrink.
Dry using natural methods (air dry) and try to keep them out of the sun for long periods of time. Boots dry faster when positioned upside-down. If desired, stuff a sheet or two of newspaper into each boot to absorb moisture. Change the paper each hour.
If you see any mold on your boots, brush in a mixture of 80% water and 20% vinegar.
Over time the use of leather conditioners may provide increased water repellency and can prevent cracking and drying of the leather.
Store boots in a place where temperatures are stable and normal. Do not store boots in attics, garages, car trunks or any unventilated spaces.
Never put boot in washing machine.
$ 209.25 $ 279.00
Here’s the problem: Steel studs, cleats or screw heads are too hard—they skate down rock surfaces like fingernails on a blackboard. Felt wears out quickly, slides on mud and algae, and can carry invasive species. Here’s the solution: our Foot Tractor Wading Boots with next-generation aluminum bar technology. The more aggressively shaped aluminum bars are just hard enough to cut through algae and slime, yet soft enough to conform to rock surfaces. They also grip well on muddy trails, won’t accumulate snow and don’t hold moisture. In other words, they offer the wading traction we’ve been looking for all our lives. Made with fast-drying synthetic leather and Venergy monofilament mesh panels, Foot Tractors offer industrial-strength support and protection in a light, comfortable boot.
Before we could build the best wading boots ever made, we had to define the word “best.” After much collaboration with our designers, ambassadors and anglers from around the world, not to mention countless hours of in-the-water research, here’s what we came up with: The best wading boots need to be ultra-comfortable and supportive for long days in heavy water. They should grip subsurface terrain, muddy trails and the occasional cross-stream log. They must drain quickly and avoid holding excess water. And on top of being tough as nails, they need a lifetime measured in decades. Finally, as we all agreed, not looking like Frankenstein boots would be a plus. Once we knew exactly what we wanted, the world-renowned Danner Boots came into the frame. We combined our fly-fishing experience with Danner’s legendary quality and craftsmanship to create a wading boot beyond all others—each one proudly made by hand (with imported parts) in Portland, Oregon. Their flexible, waterproof full-grain leather provides foot-conforming comfort, support and protection, while stitch-down construction creates a wide, stable base that’s easily resoled when the need arises. The adjustable lacing system has traditional eyelets across the forefoot and speed lacing through the ankle; the speed lacing provides easy tightening, supports the ankle when wading on uneven surfaces and helps lock the heel in place. For ultimate traction on anything but sheet ice or untextured slate or shale, strategically shaped aluminum bars bite through river slime with pit-bull grip, while the surrounding Vibram® Idrogrip sole conforms to rock texture for additional hold. They’re the best boots we’ve ever made, and we believe they’re the last ones you’ll ever need to buy.
If your size isn't available please contact us and we'll special order them for you.
Upper: full-grain leather with 1,000-denier 100% nylon paneling.
Lining: 67% polyester/33% nylon.
Top midsole: 8IR rubber.
Lower midsole: polyether polyurethane.
Outsole: Vibram® Idrogrip with aluminum bars
Danner® boots are built to accommodate additional layers such as wader booties or socks, so we suggest choosing your regular street-shoe size. Foot Tractor Boots work with thicker wader booties or socks; If you want to wear them with thin wader booties or if you’re wet-wading, please size down.