$ 249.95
Embrace the deep wade. Corner comfort. And access the untrammeled—unscathed—in Simms’ Freestone® Stockingfoots, powered by a Toray® QuadraLam™ perimeter that breathes easy, repels water, and bushwhacks with aplomb. Angler-driven architecture includes articulated engineering, with center leg-seam construction that prioritizes fit. Toast icy digits inside the fleece-lined reach-through handwarmer pocket. Conveniently convert from chest- to waist-high level thanks to reversible suspender buckles. Tap an internal zipper interface that synchs with the Tippet Tender™ Pocket or Waterproof Wader Pouch (both sold separately). And treat your feet right, with hourglass patterning for glovelike boot-to-stockingfoot fit. Simms’ best warranty in wading comes standard.
FABRIC TECH: 4-layer Toray® QuadraLam™ Waterproof/Breathable Wader Laminate
APPROX. WEIGHT: 38 oz/1077 g
STOCK SIZES: S, M, MK, L(9-11), LK, XL, XXL
TECHNOLOGIES
$ 499.95
Time on the stream is time well spent. And with the G3 Guide™ Stockingfoot wader, those precious hours can be comfortable and well-ventilated. The G3 has all the in-river essentials you need, with legendary Simms durability that can stand up to heavy use in rugged conditions. Rigging a hopper-dropper combo just became a little easier with the help of a flip-out Tippet Tender®™ pocket with dual-entry zippers and Super-fly Patch® with integrated utility tabs. And numb, sore feet are a thing of the past with anatomically designed neoprene stockingfeet with a funk-fighting anti-microbial finish.
GORE-TEX® PRO SHELL outerwear is waterproof, exceptionally lightweight and offers the ultimate in breathability, durability and extended comfort. Constructed with a woven backer, GORE-TEX® Pro Shell garments slide easily over other layers and offer exceptional tear strength and internal abrasion-resistance.
The #1 tip to prolonging the life of a wader is drying your waders. It is important to dry your waders out after each use. We recommend drying the inside first (if damp) and then the outside. When drying the outside you can pull your gravel guards up until the feet are dry and then flip them down to dry the rest of the wader
WASHING
Use a front load machine or hand wash. Use cold water and normal detergent that does not contain bleach. Once you have washed the waders make sure you dry them properly start by drying the inside first. Never put your waders in the dryer, the heat will adversely affect the seam tape on your waders and will void your warranty.
FIT
We offer more sizes than anyone, a good fit goes a long way to extending the life of your wader. Make it clear that people should use their exact measurements as we have already provided extra room for layering and movement.
GENERAL CARE
Do not store inside your car for long periods of time excess heat will damage your waders.
USE A MAT
Always put your waders on using a protective mat to shield the neoprene feet from rocks.
PROPER LAYERING
Do not wear jeans under your waders. Jeans are highly abrasive wearing on your waders from the inside out. More importantly jeans and sweatpants do not transfer moisture away from the body. Use proper layering (to view our layering collection, go here). Using layers such as these will help wick moisture away from your body and assist in the waders ability to breathe.
STAINS
Most stain removers will work fine on our waders. As long as the stain remover does not contain bleach you should be o.k.
$ 399.95
Simms' new Headwaters™ Pro Stockingfoots are handcrafted from 3-layer GORE-TEX® Pro fabric and powered by our industry-leading G3 Guide™ architecture. Patented front- and back-leg seam construction boosts both mobility and durability on the trail and in the flow. Pass through handwarmer pockets provide a cold-weather sanctuary, while chest storage pockets provide ample capacity for tools and fly boxes. Highly considered details include accessory activation via an internal zipper carrier built to synch with Simms' Tippet Tender™ pocket (sold separately); adjustable 1.5″ elastic suspenders with opposing buckles for waist-high conversion; and belt loops with multiple height options for superior fit. Abrasion bucking, built-in gravel guards and anatomical hourglass stocking feet round out this IFTD 2016 award-winning wader.
FEATURES
Sold Out
Includes M2 replacement knob and wire lace for easy lace system replacement in the field. For use with our RiverTek Boa® Boot and RiverTek Boa® Boot - Felt.
For 1st GENERATION RiverTek Boa® Boots please order M3 BOA® FIELD REPAIR KIT.
For the G4 Boa® Boot, please order the G4 Boa® Replacement Kit
To Verify which RiverTek™ Boa® Boot you have:
Look inside the boot on the tongue label where the size is marked. 2nd Generation boots will state "Boa M2 Reel" and the lace length, 1st Generation boots state only "Boa" and lace length.
$ 249.95
FEATURES
FABRIC TECH: 4-Layer Toray® QuadraLam™ Technology
APPROX. WEIGHT: 31 oz
STOCK SIZES: S, SF, SS, M, MS, MF, L, LS, LF, XL
WOMEN'S SIZES |
DRESS SIZE |
BUST* |
WAIST* |
HIPS* |
LARGEST |
INSEAM* |
STOCKING- |
---|---|---|---|---|---|---|---|
S |
6 - 8 |
35" |
27" |
37" |
37" |
31" - 32" |
6 - 7 |
S SHORT |
6 - 8 |
35" |
27" |
37" |
37" |
28" - 29" |
6 - 7 |
S FULL |
6W - 8W |
36" |
28" |
38" |
38" |
31" - 32" |
6 - 7 |
M |
10 - 12 |
37" |
29" |
39" |
39" |
31" - 32" |
8 - 9 |
M SHORT |
10 - 12 |
37" |
29" |
39" |
39" |
28" - 29" |
8 - 9 |
M FULL |
10W - 12W |
38" |
30" |
40" |
40" |
31" - 32" |
8 - 9 |
L |
14 - 16 |
39" |
31" |
41" |
41" |
31" - 32" |
9 - 10 |
L SHORT |
14 - 16 |
39" |
31" |
41" |
41" |
28" - 29" |
9 - 10 |
L FULL |
14W - 16W |
41" |
33" |
43" |
43" |
31" - 32" |
9 - 10 |
XL |
18 - 20 |
43" |
35" |
45" |
45" |
31" - 32" |
9 - 10 |
*These are body measurements
TECHNOLOGIES