Time on the stream is time well spent. And with the G3 Guide™ Stockingfoot wader, those precious hours can be comfortable and well-ventilated. The G3 has all the in-river essentials you need, with legendary Simms durability that can stand up to heavy use in rugged conditions. Rigging a hopper-dropper combo just became a little easier with the help of a flip-out Tippet Tender®™ pocket with dual-entry zippers and Super-fly Patch® with integrated utility tabs. And numb, sore feet are a thing of the past with anatomically designed neoprene stockingfeet with a funk-fighting anti-microbial finish.
GORE-TEX® PRO SHELL outerwear is waterproof, exceptionally lightweight and offers the ultimate in breathability, durability and extended comfort. Constructed with a woven backer, GORE-TEX® Pro Shell garments slide easily over other layers and offer exceptional tear strength and internal abrasion-resistance.
The #1 tip to prolonging the life of a wader is drying your waders. It is important to dry your waders out after each use. We recommend drying the inside first (if damp) and then the outside. When drying the outside you can pull your gravel guards up until the feet are dry and then flip them down to dry the rest of the wader
Use a front load machine or hand wash. Use cold water and normal detergent that does not contain bleach. Once you have washed the waders make sure you dry them properly start by drying the inside first. Never put your waders in the dryer, the heat will adversely affect the seam tape on your waders and will void your warranty.
We offer more sizes than anyone, a good fit goes a long way to extending the life of your wader. Make it clear that people should use their exact measurements as we have already provided extra room for layering and movement.
Do not store inside your car for long periods of time excess heat will damage your waders.
USE A MAT
Always put your waders on using a protective mat to shield the neoprene feet from rocks.
Do not wear jeans under your waders. Jeans are highly abrasive wearing on your waders from the inside out. More importantly jeans and sweatpants do not transfer moisture away from the body. Use proper layering (to view our layering collection, go here). Using layers such as these will help wick moisture away from your body and assist in the waders ability to breathe.
Most stain removers will work fine on our waders. As long as the stain remover does not contain bleach you should be o.k.
$ 223.20 $ 279.00
Here’s the problem: Steel studs, cleats or screw heads are too hard—they skate down rock surfaces like fingernails on a blackboard. Felt wears out quickly, slides on mud and algae, and can carry invasive species. Here’s the solution: our Foot Tractor Wading Boots with next-generation aluminum bar technology. The more aggressively shaped aluminum bars are just hard enough to cut through algae and slime, yet soft enough to conform to rock surfaces. They also grip well on muddy trails, won’t accumulate snow and don’t hold moisture. In other words, they offer the wading traction we’ve been looking for all our lives. Made with fast-drying synthetic leather and Venergy monofilament mesh panels, Foot Tractors offer industrial-strength support and protection in a light, comfortable boot.
Our Rio Azul Waders are built for anglers who want to simplify their gear without sacrificing performance, comfort or durability. Built from supple H2No® Performance Standard 4-layer, 6.1-oz polyester fabric with a waterproof/breathable barrier and a DWR (durable water repellent) finish, they feature the same single-seam construction for increased durability found throughout our wader lineup. Adding to the versatility of these lighter-weight waders, the fully adjustable suspenders have male and female buckles that allow quick conversion to a belt so that the Rio Azuls can be neatly worn as pants. The flat-panel gravel guards drain water quickly if you fish in and out of boats, in addition to better resisting abrasion and wear while hiking or wading. Beneath the gravel guards, the booties have a more anatomical, sock-like fit and are made from a denser 4mm neoprene that resists compaction better over the long haul. A stretch wading belt with low-profile buckle protects you from the inevitable “That-tailout-was-deeper-than-I-thought” swimming sessions. Front utility keeper for convenient tool attachment. A raised Fitz Roy Trout logo tops it off. Field repair kit included.
H2No® Performance Standard shell: 4-layer, 6.1-oz 100% polyester solid twill microfiber with a waterproof/breathable barrier and a DWR (durable water repellent) finish